In short the problem would come from the dongle which informs the kernels of its compatibility with the Delete Stored Link Key function but it is not. HCI Event: Command Complete (0x0e) plen 6ĭelete Stored Link Key (0x03|0x0012) ncmd 1Įrror: Unsupported Feature or Parameter Value Install:/home/florian # hciconfig hci1 resetĬan't init device hci1: Operation not supported (95) Loaded: loaded (/usr/lib/systemd/system/rvice enabled vendor preset: disable>Īctive: active (running) since Tue 18:23:38 CET 3 days ago Install:/home/florian # service bluetooth status Here are some commands: install:/home/florian # lsusbīus 001 Device 023: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) My laptop is about 20m from the inverter, and through 3 walls (one at about 20 degree angle to the path between the laptop and inverter, another lined with kitchen cupboards), yet each time I've connected it's had a steady 80% signal.Hello, I bought a bluetooth dongle which is supposed to work under linux. Incidentally, my dongle cost $6.81 delivered (supposedly from Au stock), and is specified as having a 20 to 50m range. So if I want to connect with both the inverter and phone, it seems I'll need another Bluetooth dongle! Though I then tried to pair my phone (as it had been successfully when the CSR drivers were installed) but although it can see the phone, it won't pair. Download Cambridge Silicon Radio (CSR) Bluetooth Radio Bluetooth Drivers for Windows 11, 10, 8. USB information of the adapter using the lsusb command: Bus 001 Device 005: ID 0a12:0001 Cambridge Silicon Radio, Ltd BlueWhile some of the required software. but upon opening Sunny Explorer, it promptly found the inverter and after ensuring the IDnet was correctly set at 1, and using the '0000' password, it successfully connected. Hi, I cant find a Bluetooth driver for my Cambridge Silicon Radios USB Bluetooth device. After this I could not find the inverter via normal 'search for Bluetooth devices'. and it chose to load the Microsoft generic drivers. I un-installed the Cambridge Silicon Radio driver software, and with the CSR mini disk still in the laptop, removed and reinstalled the dongle. I managed to get my Bluetooth dongle working. Note: These drivers are for the Bluetooth 4.0 Dongle Micro Wireless Adapter for PC. Some more info in event you haven't solved your issues. Click here to download the CSR Bluetooth Dongle Drivers. This device is not working properly because Windows cannot load the drivers required for this device. I tried for searching drivers for it but i was afraid that ill get a virus. Mine works fine with my phone (Samsung Galaxy S4), but I'd purchased it to connect to my SMA inverter using SMA's 'Sunny Explorer'. I bought an a Bluetooth 5.0 adapter and it doesn't work. Will also work with most other brands that use the same chipset. I don't know it the correct driver may be found here, but it's a start! This guide will detail how to make a CSR 4.0 USB bluetooth adapter work with a computer. I've just performed a basic search and found. If not, try contacting the supplier, who may be able to email you a zipped driver stack, or a link from where you can download it.Īlternatively, try searching the key words (e.g. If yours also came with a disk, I'd un-install the generic driver, and install from the disk. I also recently purchased a similar (or same) device (CSR v4.0 bluetooth dongle), and have a laptop with a Windows7 Home Premium 64bit operating system.Īlthough a 'plug and play', it still required installing the driver software from the mini-disk that came with it, which contained the Cambridge Silicon Radio Ltd. Hi, experts, I have just purchased a new bluetooth v4.0 dongle (brand should be cambridge silicon radio).Īfter I plugged to my labtop (win7 home premium 64bit), windows 7 detects it as generic bluetooth radio.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |